Skoda Fabia

Since 2000 of release

Repair and car operation


Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
- 11. A body
   11.1. Removal and installation of a skeleton of a motor compartment
   - 11.2. A forward door
      11.2.1. Removal and installation
      11.2.2. Replacement of the cylinder of the lock
      11.2.3. Removal and installation of the external handle of a door
      11.2.4. Removal and lock installation
      11.2.5. Replacement of sealants
   + 11.3. A back door
   + 11.4. Seats
   + 11.5. Seat belts
   11.6. Removal and installation of the panel of devices
   11.7. Removal and tjagovo-drawbar installation
   + 11.8. A heater
+ 12. Electroschemes





11.2.4. Removal and lock installation
THE GENERAL DATA

Fastening of the internal panel of a door

 1 – screws of fastening of glass;

2, 3 – screws of fastening of the internal panel;

4 – the internal panel

Bolts of fastening of the lock of a door

Removal of the lock of a door

 1 – a latch;

2 – the holder;

3 – the lock

Detachment of draughts from the lock

 1 – draught of the button of blocking of a door;

2 – the lock lever;

3 – draught of the internal handle;

4 – the holder on the lock

On the internal panel of a door are put the lock, стеклоподъемник and динамик.

PERFORMANCE ORDER
1. Disconnect a wire from the plug - the storage battery.
2. Shift a protective cover 4 (fig. Removal of a forward door see) and disconnect колодки with wires from a forward rack.
3. Remove a door upholstery.
4. Remove the external handle of a door.
5. Having hooked a screw-driver, take out two заглушки from the internal panel 4 (fig. Fastening of the internal panel of a door see) doors.
6. Lower door glass so that to get access to screws of 1 fastening of glass.
7. Ослабьте an inhaling of screws 1 also dissolve collars.
8. Lift hands glass and fix it in this position, having inserted a wedge between glass and the door panel.
9. Turn on at an end face of a door two bolts of fastening of the lock, the Bolts of fastening of the lock of a door shown on fig.
10. Turn away screws 2 and 3 (fig. Fastening of the internal panel of a door see) fastenings of the internal panel of a door.
11. Remove the internal panel 4, having deduced it towards a forward part of a door.
12. Pull out a plait of wires from a door.
13. Having hooked a screw-driver a latch 1 (fig. Removal of the lock of a door see), remove the lock 3 from the holder 2.
14. Disconnect draught 1 (fig. the Detachment of draughts from the lock see) buttons of blocking of a door, having turned the lock, as shown an arrow.
15. Take out draught 3 internal handles from the holder 4 on the lock.
16. Having turned draught 3 on 90 , disconnect it from the lever 2.
17. Will put the door lock upside-down. At fastening of the internal panel by the first wrap screws 3 (fig. Fastening of the internal panel of a door see).

The inhaling moments, Нм

Screws of fastening of the internal panel of a door
8
Screws of fastening of glass
10
Bolts of fastening of the lock
20