Skoda Fabia

Since 2000 of release

Repair and car operation

1.33. Ventilation and salon heating

THE GENERAL DATA

The control panel a heater

1 – the handle of adjustment of temperature; 2 – the handle of the switch of the fan; 3 – the management handle заслонками a heater; 4 – the button of the switch of the conditioner; 5 – the switch button рециркуляции air

The handle 1 regulates temperature of air arriving in salon. At handle installation in a dark blue zone in salon not warmed-up air arrives. At handle installation in other positions air is warmed up approximately to the temperature specified on a scale. The red zone specifies that in salon as much as possible warmed-up air arrives.

The handle 2 regulates speed of rotation of the fan of a heater. In position 1 speed of the fan minimum, in position 4 – maximum, positions 2 and 3 – intermediate. In position 0 fan is switched off.

The handle of 3 managements заслонками a heater can be established in following positions:
 – – The maximum stream of air goes on having blown in wind and lateral glasses;
 – – The maximum stream of air passes through the central and lateral nozzles;
 – – The maximum stream of air is directed downwards on having blown in spaces for feet at forward and back seats;
 – – Air stream in regular intervals arrives from all snuffled.

The button 4 joins and switches off the conditioner (if it is established).

By pressing the button 5 switches рециркуляции air заслонка in a heater are blocked by receipt of external air and through a heater air from car salon circulates. Thus in the button illumination lights up. The system рециркуляции is intended for acceleration of warming up of salon.

---

The prevention

The system рециркуляции is not recommended to be included for long time as car glasses can mist over.

---

Receipt of a stream of air in salon

1 – a nozzle обдува a wind window; 2 – a nozzle обдува lateral glasses; 3 – the central nozzles;

4 – a lateral nozzle; 5 – a nozzle обдува spaces for feet

Salon ventilation

The system рециркуляции should be switched off (the button 5, fig. the Control panel a heater) see.

PERFORMANCE ORDER

1. Turn the handle 1 against the stop to the left (a dark blue zone). 2. The handle 2 establish desirable speed of rotation of the fan. 3. Establish the handle 3 in position. 4. Open central 3 (fig. Receipt of a stream of air in salon see) and lateral 4 nozzles on the panel of devices.

Salon warming up

PERFORMANCE ORDER

1. Turn the handle 1 (fig. the Control panel a heater) against the stop to the right (a red zone see). 2. The handle 2 establish the maximum speed of rotation of the fan (position 4). 3. Establish the handle 3 in position. 4. Open central 3 (fig. Receipt of a stream of air in salon see) and lateral 4 nozzles on the panel of devices. 5. For short time include system рециркуляции, having pressed the button 5 (fig. the Control panel a heater see).

Maintenance of comfortable temperature in salon

PERFORMANCE ORDER

1. The handle 2 (fig. the Control panel a heater see) establish intermediate speed of rotation of the fan (position 2 or 3). 2. The handle 1 establish desirable temperature. 3. Establish the handle 3 in position. The prevention If glasses have misted over, establish the handle 3 between positions and and open lateral nozzles 4 (fig. Receipt of a stream of air in salon see) on the panel of devices.

Elimination обмерзания glasses

PERFORMANCE ORDER

1. Turn the handle 1 (fig. the Control panel a heater) against the stop to the right (a red zone see). 2. The handle 2 establish the maximum speed of rotation of the fan (position 4). 3. Establish the handle 3 in position. 4. For additional обдува lateral glasses open lateral nozzles 4 (fig. Receipt of a stream of air in salon see) on the panel of devices.

Elimination запотевания glasses

PERFORMANCE ORDER

1. Turn the handle 1 (fig. the Control panel a heater) against the stop to the left (a dark blue zone see). 2. The handle 2 establish intermediate speed of the fan (position 2 or 3). 3. Establish the handle 3 in position. 4. For additional обдува lateral glasses open lateral nozzles 4 (fig. Receipt of a stream of air in salon see) on the panel of devices. The prevention If glasses do not moisten at обдуве cold air, turn the handle 1 (fig. the Control panel a heater) against the stop to the right (a red zone see).