Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
- 3. Greasing system
   3.1. Removal and installation oil картера the engine
   3.2. Repair of the oil pump on engines of 1,0 l, 37 kw and 1,4 l, 50 kw
   3.3. Replacement of the oil pump
   3.4. The oil filter of the diesel engine
   3.5. Check of level of oil in картере the engine
   3.6. Replacement of oil and the oil filter
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes





3.3. Replacement of the oil pump

ENGINES of 1,4 L, 55 And 74 kw

PERFORMANCE ORDER
1. Merge oil from картера the engine.
2. Remove oil картер (subsection 3.1 see).
3. Turn away three bolts 24 (fig. of the Detail of system of greasing of the engine of 1,4 l, 55 and 74 kw see) fastenings маслоприемника 25 to the block of cylinders and the oil pump. Remove маслоприемник and its lining 23.
4. Remove a belt of a drive of camshafts and a pulley 20 cranked shaft (subsection 2.4.2 see).
5. Turn away bolts 14 and remove the oil pump 13 with a lining 22.
6. Clear of a dirt and wash out uajt-spiritom a grid маслоприемника. If the grid does not manage to be cleared or it is damaged, replace маслоприемник.
7. Establish the new pump upside-down, having replaced new linings 22 and 23.

The inhaling moments, Нм

Fastening bolts маслоприемника
10
Bolts of fastening of the oil pump
12

DIESEL ENGINES

PERFORMANCE ORDER
1. Merge oil from картера the engine.
2. Remove oil картер (subsection 3.1 see).
3. Remove a forward cover 5 (fig. of the Detail of system of greasing of the diesel engine see) block of cylinders (subsection 2.10 see).
4. Ослабьте an inhaling of a bolt of fastening of the tension device 7.
5. Take aside the tension device 7 and remove a chain 4 drives of the oil pump.
6. Turn away bolts 6 and remove a partition 16 oil картера with the oil pump 1 in gathering.
7. Clear of a dirt and wash out uajt-spiritom a grid маслоприемника. If the grid does not manage to be cleared or it is damaged, replace маслоприемник 15. For this purpose turn away two bolts of fastening маслоприемника to the pump. At installation маслоприемника replace a sealing ring 14.
8. Replace a gear wheel 2 with the damaged teeths. For this purpose, keeping a gear wheel from проворачивания, turn away a bolt 3.
9. Establish the new pump upside-down.

The inhaling moments, Нм

Fastening bolts маслоприемника
15
Bolt of fastening of the tension device of a chain
15
Bolts of fastening of the oil pump and partition oil картера
15
Bolt of fastening of a gear wheel of the oil pump
25