Skoda Fabia

Since 2000 of release

Repair and car operation


Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
- 6. System of release of the fulfilled gases
   6.1. Check of tightness of system of release of the fulfilled gases
   6.2. Removal and installation of a reception pipe of the muffler (petrol engines)
   6.3. Removal and installation of a reception pipe of the muffler (diesel engines)
   6.4. Replacement of knots of the muffler in gathering (the resonator or the muffler)
   6.5. System рециркуляции the fulfilled gases (engines of 1,4 l, 55 and 74 kw)
   6.6. System рециркуляции the fulfilled gases (engines of 1,9 l, 74 kw)
   6.7. System рециркуляции the fulfilled gases (engines of 1,9 l, 47 kw)
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes


На півночі Москви тварин безкоштовно щеплять від сказу


6.7. System рециркуляции the fulfilled gases (engines of 1,9 l, 47 kw)
THE GENERAL DATA

System details рециркуляции the diesel engine of 1,9 l, 47 kw
1 – an inlet pipe;
2 – a lining;
3 – the system valve рециркуляции;
4 – bolts of fastening of the valve;
5 – a collar; 		6 – a coupling bolt of a collar;
7 – a nut of fastening of a connecting pipe;
8 – a connecting pipe;
9 – a final collector

Valve check рециркуляции the diesel engine of 1,9 l, 47 kw

 1 – the vacuum pump;

2 – a connecting pipe;

3 – the valve рециркуляции;

4 – a valve membrane

Valve check

PERFORMANCE ORDER
1. Remove the top casing of the engine (subsection 2.1 see).
2. Disconnect a vacuum hose from the union of the valve 3 (fig. of the Detail of system рециркуляции the diesel engine of 1,9 l, 47 kw see) systems рециркуляции.
3. Connect to the union of the valve 3 (fig. of the Detail of system рециркуляции the diesel engine of 1,9 l, 47 kw see) the vacuum pump 1 (fig. valve Check рециркуляции the diesel engine of 1,9 l, 47 kw see).
4. By means of the pump create depression in the valve. The membrane 4 valves should move upwards (it is possible to check to the touch fingers from below the valve), and after a detachment of the vacuum pump the membrane should return to a starting position (it is possible to define on an accurate sound). Otherwise the valve is faulty also it it is necessary to replace.

Removal and installation of elements of system рециркуляции

PERFORMANCE ORDER
1. Remove the top casing of the engine (subsection 2.1 see).
2. Disconnect a vacuum hose from the union of the valve 3 (fig. of the Detail of system рециркуляции the diesel engine of 1,9 l, 47 kw see) systems рециркуляции.
3. Turn away two bolts of 4 fastenings of the valve of 3 systems рециркуляции to an inlet pipe of 1 engine.
4. Turn away a coupling bolt 6 collars 5 and remove the valve of 3 systems рециркуляции from a connecting pipe 8.
5. For removal of a connecting pipe 8 turn on two nuts of 7 its fastenings to a final collector.
6. Replace linings 2 irrespective of their condition.
7. Establish system elements рециркуляции the fulfilled gases upside-down. Nuts of 7 fastenings of a connecting pipe to a final collector replace new.

The inhaling moments, Нм

Bolts of fastening of the valve
25
Coupling bolt of a collar of fastening of a connecting pipe to the valve
10
Nuts of fastening of a connecting pipe to a final collector
25