| 1. Disconnect a wire from the plug - the storage battery. |
| 2. Lift a decorative cap 11 (fig. of the Detail of a cleaner of glass of a door of a back see) on the lever of 1 screen wiper. |
| 3. Turn on not to the end (not to damage a platen carving) a nut of 10 fastenings of the lever of a screen wiper. |
| 4. By means of flat-nose pliers pull off the lever 1 from a cone of the platen of a screen wiper. |
| 5. Definitively turn away a nut of 10 fastenings and remove the lever 1 from the platen. |
| 6. Remove the bottom upholstery of a door of a back. |
| 7. Disconnect колодку 1 (fig. Removal of a motor-reducer of a door of a back see) with wires from a motor-reducer 4. |
| 8. Disconnect a hose 2 from the motor-reducer union. |
| 9. Turn away three nuts of 3 fastenings and remove a motor-reducer 4. |
| 10. Establish a motor-reducer upside-down. |