Skoda Fabia

Since 2000 of release

Repair and car operation

Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
- 9. Brake system
   + 9.1. Pedal knot
   9.2. The vacuum amplifier
   9.3. The main brake cylinder
   9.4. A pressure regulator (on models without ABS)
   + 9.5. The brake mechanism of a forward wheel of type FS III
   - 9.6. The brake mechanism of a forward wheel of type FS II
      9.6.1. Replacement brake колодок and a brake disk
      9.6.2. Support repair
   + 9.7. The brake mechanism of a back wheel (drum-type)
   + 9.8. The brake mechanism of a back wheel (disk)
   + 9.9. A lay brake
   + 9.10. Antiblocking system (ABS)
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes

9.6. The brake mechanism of a forward wheel of type FS II

9.6.1. Replacement brake колодок and a brake disk

THE GENERAL DATA

The forward brake mechanism of type FS II

1 – external brake колодка;
2 – internal brake колодка;
3 – a support;
4 – the rubber plug;
5 – the top plug;
6 – распорная the plug;
7 – a directing finger;
8 – an air line;
9 – a bolt;
10 – an elastic core;
11 – a tip of a brake hose with the hollow screw and a sealing ring;
12 – a rotary fist;
13, 16 – bolts;
14 – the gauge of frequency of rotation of a wheel;
15 – a brake board;
17 – a nave;
18 – a brake disk;
19 – the screw

Installation brake колодок the brake mechanism of type FS II

1 – a support;

2 – external brake колодка;

3 – internal brake колодка

Колодки and disks of the brake mechanism of type FS II (fig. the Forward brake mechanism of type FS II see) replace similarly to replacement колодок and disks of the brake mechanism of type FS III (subsection 9.5.1 see). Unique difference consists in marks brake колодок: колодка 3 (fig. Installation brake колодок the brake mechanism of type FS II see) at which frictional overlay the area of a friction less, should be from the interior of (the piston parties), from lateral aspect establish колодку 2 at which frictional overlay the area of a friction is more.

Nominal thickness of a frictional overlay (with the basis), mm
19,6

Is minimum admissible thickness of a frictional overlay (with the basis / without the basis), mm
7,0/2,0

Nominal thickness of a brake disk, mm
18

The minimum admissible thickness of a brake disk, mm
15

The inhaling moments, Нм

Bolts of fastening of a wheel
120

Directing fingers
25

The screw of fastening of a brake disk
4