Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
- 7. Transmission and a running gear
+ 7.1. A transmission
+ 7.2. A forward suspension bracket
- 7.3. A back suspension bracket
7.3.1. Removal and installation of a nave of a wheel (the drum-type brake mechanism)
7.3.2. Removal and installation of a nave of a wheel (the disk brake mechanism)
7.3.3. Removal and pin installation (drum-type brake to mechanisms)
7.3.4. Removal and pin installation (the disk brake mechanism)
7.3.5. Removal and shock-absorber installation
7.3.6. Removal and spring installation
7.3.7. Removal and installation of a back suspension bracket
7.3.8. Check and adjustment of corners of installation of wheels
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes
|
Details of a back suspension bracket with drum-type brakes
1 – a bolt of fastening of a wheel;
2 – the screw of fastening of a brake drum;
3 – a brake drum;
4 – a protective cap;
5 – a nave nut;
6 – a nave;
7 – a bolt of fastening of a board of a brake;
8 – the brake mechanism in gathering;
9 – the holder of a cable;
10 – a cable of a lay brake;
11 – an arm;
12 – a bolt of fastening of an arm;
13 – a pressure regulator;
14 – a bolt of fastening of a regulator;
15 – a bolt of fastening of a loading spring;
16 – the spring holder;
17 – резинометаллическая a support; |
18 – a beam of the back bridge;
19 – an axis pin;
20 – a brake tube;
21 – a beam of a back suspension bracket (an execution variant);
22, 29 – nuts;
23 – a bolt of the bottom fastening of the shock-absorber;
24 – the gauge of frequency of rotation of a wheel;
25 – заглушка (for cars without ABS);
26 – a bolt of fastening of the gauge;
27 – the bottom lining of a spring;
28 – a bolt of fastening of a beam of the back bridge;
30 – an arm of fastening of a back suspension bracket;
31 – a spring of a back suspension bracket;
32 – the top lining of a spring;
33 – a bolt of the top fastening of the shock-absorber;
34 – the shock-absorber;
35 – the holder of the shock-absorber |
Details of a back suspension bracket with disk brakes
1 – directing колодок with a support in gathering;
2 – a bolt of fastening of a wheel;
3 – the screw of fastening of a brake disk;
4 – a brake disk;
5 – a protective cap;
6 – a nave nut;
7 – a nave;
8 – a bolt of fastening of a board of a brake;
9 – a brake board;
10 – the holder of a cable;
11 – a cable of a lay brake;
12 – the spring holder;
13 – резинометаллическая a support;
14 – a beam of the back bridge; |
15 – an axis pin;
16 – a bolt of fastening directing колодок;
17 – a brake tube;
18, 24 – nuts;
19 – a bolt of the bottom fastening of the shock-absorber;
20 – the gauge of frequency of rotation of a wheel;
21 – a bolt of fastening of the gauge;
22 – the bottom lining of a spring;
23 – a bolt of fastening of a beam of the back bridge;
25 – an arm of fastening of a back suspension bracket;
26 – a spring of a back suspension bracket;
27 – the top lining of a spring;
28 – a bolt of the top fastening of the shock-absorber;
29 – the shock-absorber;
30 – the holder of the shock-absorber |
Back suspension bracket semiindependent, rychazhno-spring, with longitudinal levers, шарнирно fixed on a body of the car and connected among themselves a cross-section beam of U-shaped type. Longitudinal levers are connected to a body sajlent-blocks. Suspension bracket springs twisted, with the reduced diameter of trailer coils. That noise and vibration were not transferred to a body, the top and bottom ends of springs lean against elastic support. |
|