Skoda Fabia

Since 2000 of release

Repair and car operation

7.2.1. Removal and installation of a telescopic rack

THE GENERAL DATA

Fastening of a spherical support

1 – the lever of a forward suspension bracket; 2 – a bolt; 3 – a spherical support

Details of a rack of a forward suspension bracket

1 – a rotary fist; 2 – a nut; 3 – a coupling bolt; 4 – амортизаторная a rack; 5 – the compression buffer; 6 – a protective casing; 7 – a spring of a forward suspension bracket;

8 – the persistent bearing of a support; 9 – a rack support; 10 – a rod nut; 11 – a support plate; 12 – a bolt of fastening of a rack; 13 – a protective cap

Details of a beam of a forward suspension bracket

1 – a beam; 2 – a nut of fastening of a rack to a stabilizer bar; 3 – a stabilizer bar; 4 – a bar pillow; 5 – a pillow holder; 6 – a nut of fastening of a rack of the stabilizer to a telescopic rack; 7 – a rack of the stabilizer of cross-section stability; 8 – an arm; 9, 10, 19, 22 – bolts; 11 – резинометаллическая a support; 12 – the lever of a forward suspension bracket;

13 – a lock plate; 14 – a nut of a finger of a spherical support; 15 – a spherical support; 16 – a bolt of fastening of a spherical support; 17 – an air line; 18 – percussion caps; 20 – a beam arm; 21 – a bolt of fastening of the steering mechanism; 23 – bolts of fastening of a back support of the power unit to a transmission; 24 – a bolt of fastening of a back support of the power unit to a beam; 25 – a back support of the power unit

PERFORMANCE ORDER

1. Ослабьте an inhaling of bolts 9 (fig. of the Detail of a forward suspension bracket see) fastenings of a corresponding wheel and a nut of 10 naves. 2. Raise and establish on reliable support a forward part of the car. 3. Remove a forward wheel, definitively having turned away bolts of its fastening. 4. Turn away a nut of 26 fastenings and disconnect a rack 27 stabilizers of cross-section stability from a telescopic rack 1. 5. Disconnect wires from the gauge of 24 frequencies of rotation of a wheel. Turn away a bolt of 25 fastenings and remove the gauge of 24 frequencies of rotation of a wheel. 6. Remove a support 13 and suspend it on a wire to a body (subsection 9.5.1 see) or (subsection 9.6.1 see). 7. Mark position of bolts 2 (fig. Fastening of a spherical support see) fastenings of the spherical hinge on the lever of 1 suspension bracket, having led round contours of heads of bolts. It will help to keep approximately after assemblage corners of installation of wheels. 8. Turn away bolts of 2 fastenings of a spherical support 3 to the lever. 9. By means of a special stripper 1 (fig. of Vypressovka шлицевого a tip of an external SHRUS from a nave see) выпрессуйте шлицевый a tip of an external SHRUS from a nave of 2 wheels. In the absence of a stripper it can be made hammer blows through the wooden prorate on an end face шлицевого a tip. 10. Suspend a wheel drive to a body by means of a wire. 11. Disconnect steering draught from a rotary fist (subsection 8.4.1 see) and suspend it on a wire to a body. 12. In подкапотном space turn away three bolts 12 (fig. of the Detail of a rack of a forward suspension bracket) rack fastenings to a body see and remove a rack through a wheel niche. 13. Establish a telescopic rack upside-down, having replaced nuts of a nave and a spherical finger of a tip of steering draught, and also bolts 16 (fig. of the Detail of a beam of a forward suspension bracket see) fastenings of a spherical support and their lock plate 13. First of all roll bolts 12 (fig. of the Detail of a rack of a forward suspension bracket see) rack fastenings from outside a motor compartment.

The inhaling moments, Нм

Nut of a nave of a wheel	30
Bolts of fastening of the spherical hinge to the suspension bracket lever	20, then to tighten on 90
Nut of a spherical finger of a tip of steering draught	20, then to tighten on 90
Nut of fastening of a rack of the stabilizer of cross-section stability to a forward rack	40
Bolts of the top fastening of a forward rack	25
Bolt of fastening of the gauge of frequency of rotation of a wheel	8
Bolts of fastening of a wheel	120