Skoda Fabia

Since 2000 of release

Repair and car operation


Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
- 8. A steering
   8.1. Removal and steering wheel installation
   8.2. Removal and installation of returnable and contact rings in gathering
   - 8.3. A steering column
      8.3.1. Removal and installation
      8.3.2. Replacement of the case of the switch (lock) of ignition
      8.3.3. Replacement демпфера a steering column
      8.3.4. Removal and installation of an arm of a steering column
   + 8.4. The steering mechanism (without the amplifier)
   + 8.5. The steering mechanism (with the amplifier)
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes





8.3.2. Replacement of the case of the switch (lock) of ignition
THE GENERAL DATA

Fastening of the case of the switch (lock) of ignition

 1 – the case of the switch (lock) of ignition;

2 – a bolt of fastening of the case;

3 – a steering column

PERFORMANCE ORDER
1. Remove подрулевой the switch (subsection 10.11 see).
2. Disconnect колодку 1 (fig. Connecting колодки the switch (the lock) ignitions see) with wires of the switch (lock) of ignition.
3. Disconnect колодку 4 with immobilizer wires.
4. Disconnect from a steering column "a mass" wire 3.
5. Remove the switch (lock) of ignition.
6. Take two bolts 2 (fig. Fastening of the case of the switch (the lock) ignitions see) fastenings of the case of the switch (lock) of ignition with the broken heads. It can be made, for example, by means of a hammer and a chisel.
7. Remove the case of 1 switch (lock) of ignition.
8. Establish the new case of the switch (lock) of ignition and fix its new bolts with отрывными heads. Tighten bolts until heads will not break.
9. Further spend assemblage upside-down