Shkoda Fabija
+ 1.1. The car description
- 2. The engine
2.1. Removal of the top casing of the engine
+ 2.2. Installation of the piston of the first cylinder in position ВМТ of a step of compression
2.3. Replacement of a belt of a drive of the generator
+ 2.4. Replacement and adjustment of a tension of a belt of a drive of a camshaft
2.5. Replacement of a chain of a drive of a camshaft
2.6. Selection of a distributive gear wheel of a cranked shaft
2.7. Replacement of a lining of a head of the block of cylinders
2.8. Replacement of an epiploon of a camshaft
2.9. Replacement маслосъемных caps
2.10. Replacement of a forward epiploon of a cranked shaft
2.11. A back epiploon of a cranked shaft
+ 2.12. Repair of a head of the block of cylinders
+ 2.13. Engine repair
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes
|
THE DIESEL ENGINE
The prevention Back epiploon replace only in gathering with the holder.
The epiploon should be made of material ПТФЭ, a distinctive sign of such epiploon is the versatile working edge (fig. the Epiploon of a cranked shaft see) and absence of a spring. Before installation do not grease a working edge of an epiploon and a shaft, they should be dry and pure.
| PERFORMANCE ORDER |
| 1. Remove a transmission. |
| 2. Remove coupling. |
| 3. Turn away bolts 5 (fig. Installation of epiploons of a cranked shaft see) and remove a flywheel 4. |
| 4. Remove a guard 6 картера couplings. |
| 5. Remove oil картер the engine (subsection 3.1 see). |
| 6. Turn away bolts of 7 fastenings and remove the holder 8 with an epiploon. |
| 7. Establish the new holder with an epiploon. Thus do not take out from an epiploon directing plug, on this plug move the holder with an epiploon on a cranked shaft. Screw bolts 7, then remove from a cranked shaft directing plug. |
| 8. Establish all removed details upside-down. |
|
PETROL ENGINES of 1,0 l, 37 kw And 1,4 l, 50 kw
| PERFORMANCE ORDER |
| 1. Remove a transmission. |
| 2. Remove coupling. |
| 3. Keeping a cranked shaft from проворачивания, turn away bolts 6 (fig. the Block of cylinders of engines of 1,0 l, 37 kw and 1,4 l, 50 kw) fastenings see and remove a flywheel 5. |
| 4. Take out an old epiploon 7 by means of a stripper of sealing rings or having picked up a screw-driver. Wipe a pure rag seats under an epiploon on cranked to a shaft and in the holder 8. If it is not possible to take out an old epiploon, it is possible to remove the holder 8. |
| 5. Grease a working edge and an external surface of a new epiploon with engine oil. |
| 6. Запрессуйте a new epiploon in the holder 8 against the stop, a working edge inside. |
| 7. Establish all details upside-down. |
|
|
|