Skoda Fabia

Since 2000 of release

Repair and car operation

2.5. Replacement of a chain of a drive of a camshaft

THE GENERAL DATA

The block of cylinders of engines of 1,0 l, 37 kw and 1,4 l, 50 kw

1 – a bolt of fastening of the case; 2 – the case of covers of radical bearings of the engine of 1,4 l; 3 – a persistent half ring of a cranked shaft of the engine 1,4 l; 4 – a bolt of fastening of the holder of a back epiploon; 5 – a flywheel; 6 – a bolt of fastening of a flywheel; 7 – a back epiploon of a cranked shaft; 8 – the holder of a back epiploon; 9 – a filter; 10 – a bolt of fastening of the screen; 11 – a bolt of fastening of the gauge; 12 – the detonation gauge; 13 – the block of cylinders; 14 – a bolt of fastening of an arm маслоприемника; 15 – a cover of distributive gear wheels; 16 – a forward epiploon of a cranked shaft; 17 – a pulley of a drive of the generator;

18 – a bolt of fastening of a pulley of a cranked shaft; 19 – a bolt of fastening of a cover; 20 – a cover lining; 21 – a camshaft gear wheel; 22 – a gear wheel of a drive of the oil pump; 23 – a bolt of fastening of gear wheels; 24 – a chain of a drive of a camshaft; 25 – the top loose leaves of radical bearings; 26 – a gear wheel of a cranked shaft; 27 – шпонка; 28 – a cranked shaft of the engine of 1,4 l; 29 – the bottom loose leaf of the radical bearing; 30 – covers of radical bearings of the engine of 1,0 l; 31 – a persistent half ring of a cranked shaft of the engine of 1,0 l; 32 – a cranked shaft of the engine of 1,0 l

The camshaft of petrol engines in volume of 1,0 l, capacity of 37 kw and 1,4 l, of 50 kw is resulted by capacity in rotation by a chain.

---

The prevention

The chain needs to be changed complete with gear wheels of cranked and distributive shaft.

If a chain remove not for replacement, it is necessary to mark a direction of its rotation as at change of a direction of rotation the chain will quickly wear out.

---

PERFORMANCE ORDER

1. Remove a belt of a drive of the generator (subsection 2.3 see). 2. Keeping a cranked shaft from проворачивания, turn away a bolt 18 and remove a pulley 17 drives of the generator. 3. Remove oil картер the engine (subsection 3.1 see). 4. Turn away a bolt of 14 fastenings of an arm of the receiver of the oil pump. 5. Turn away bolts of 19 fastenings of a cover of 15 distributive gear wheels and remove it with a lining of 20 covers. The prevention It is necessary to replace a lining of a cover of distributive gear wheels with the new. 6. Turn away a bolt of 23 fastenings and remove a gear wheel 22 drives of the oil pump. 7. Remove gear wheels 21 and 26 together with a chain. 8. Pick up a gear wheel of a cranked shaft (subsection 2.6 see). 9. Put on a chain gear wheels so that between labels on them 12 axes of links of a chain, as is shown in drawing have settled down. In such position establish gear wheels on cranked and distributive shaft. Establish a gear wheel of a drive of the oil pump. Screw a bolt of fastening of gear wheels, preliminary having put on a carving of a bolt hermetic Loctite 648 (1 – a chain of a drive of a camshaft; 2 – a camshaft gear wheel; 3 – a gear wheel of a cranked shaft; And – a label on a camshaft gear wheel; – a label on a gear wheel of a cranked shaft). 10. Establish all removed details upside-down. Before вворачиванием bolts of fastening of a cover of distributive gear wheels put on their carving hermetic Loctite 242.