Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
- 5. Cooling system
   5.1. Check of tightness of system of cooling
   5.2. Check of a stopper of a broad tank
   5.3. Removal and radiator installation on models without the conditioner
   5.4. Removal and radiator installation on models with the conditioner
   5.5. Removal and installation of the water pump on models with petrol engines
   5.6. Removal and installation of the water pump on models with diesel engines
   5.7. Removal and installation of the fan of a radiator
   5.8. Replacement of the gauge of inclusion of the fan
   5.9. Removal and thermostat installation
   5.10. Thermostat check
   5.11. Replacement of hoses of system of cooling of the engine
   5.12. Check of level of a cooling liquid
   5.13. Replacement of a cooling liquid
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes





5.2. Check of a stopper of a broad tank
THE GENERAL DATA

The final valve established in a stopper of a broad tank, supports pressure in the set limits and prevents damage of elements of system. With the defective valve it is necessary to replace a cover.

PERFORMANCE ORDER
1. Uncover 4 (fig. the Radiator of system of cooling see) broad tank.
2. Clear an internal surface of a cover of pollution.
3. Establish a stopper on a tester representing the manual piston pump with a manometre.
4. Raise the pump of a tester pressure to 0,12 мПа. During 10 about pressure should not decrease.
5. Raise pressure to 0,15 мПа: the final valve should open, pit pressure to 0,12 мПа and be closed.