Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
- 8. A steering
   8.1. Removal and steering wheel installation
   8.2. Removal and installation of returnable and contact rings in gathering
   + 8.3. A steering column
   - 8.4. The steering mechanism (without the amplifier)
      8.4.1. Replacement of a tip of steering draught
      8.4.2. Removal of the steering mechanism
      8.4.3. Installation of the steering mechanism
      8.4.4. Check and position adjustment рейки the steering mechanism
      8.4.5. Check and backlash adjustment between a gear wheel and рейкой
      8.4.6. Replacement of steering draught
   + 8.5. The steering mechanism (with the amplifier)
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes





8.4.2. Removal of the steering mechanism
PERFORMANCE ORDER
1. Establish a steering wheel 1 in the position corresponding rectilinear movement of the car. It is recommended to fix a steering wheel, for example, a sticky tape 2.

The prevention

During repair it is forbidden to turn a steering wheel as the mechanism of a pillow of safety can fail.


2. Turn on two plastic nuts 1 (fig. casing Fastening карданного a shaft of a steering column) fastenings of a casing 2 карданного a shaft of a steering column see and remove a casing.
3. Turn away a coupling bolt 4 (fig. Fastening of a shaft of a steering column to a shaft приводной gear wheels of the steering mechanism see) plugs карданного the hinge.
4. Remove upwards a plug 2 карданного the hinge from a shaft 1 приводной gear wheels of the steering mechanism.
5. Remove грязезащитный a guard and forward wheels.
6. On models with the reception pipe of the muffler which are passing under a beam of a forward suspension bracket, remove a reception pipe with neutralizer.
7. Disconnect a back support 10 (Fastening of the steering mechanism fig. see the car (without the amplifier)) the power unit from a transmission, having turned away two bolts of 9 fastenings.
8. Disconnect tips of both steering draughts from rotary levers (subsection 8.4.1 see).
9. Establish a reliable support under a beam of a forward suspension bracket.
10. Turn away bolts of 8 fastenings of the steering mechanism to a beam 11 forward suspension brackets.
11. Lower a beam of a forward suspension bracket (subsection 7.2.5 see).
12. Remove the steering mechanism.