| 1. Disconnect a wire from the plug - the storage battery. |
| 2. Remove the top casing of the engine (subsection 2.1 see). |
|
|
3. Disconnect колодку 1 with wires from the gauge of 2 temperatures of fuel. |
| 4. Remove the gauge and, having connected to its contacts an ohmmeter, measure resistance of the gauge. |
| 5. Heat up the gauge, having lowered it in hot water (temperature approximately 80 ), and again measure its resistance. Compare the received results to the schedule (fig. the Schedule of dependence of resistance of the gauge of temperature of fuel from gauge temperature see). For example, at temperature 30 About resistance of the gauge should be 3790–4270 Ohm, and at temperature 80 With – 600–660 Ohm. If the measured resistance does not correspond specified, replace the gauge. |
|