The DIESEL ENGINE of 1,9 l, 74 kw Except frequency of rotation of a cranked shaft the gauge specifies also reference points for the engine management block. Therefore, if the gauge signal is gone, the engine will stop.
| PERFORMANCE ORDER |
| 1. Disconnect a wire from the plug - the storage battery. |
| 2. Remove the top casing of the engine (subsection 2.1 see). |
|
|
3. Disconnect колодку I with wires from the gauge of II frequency of rotation. |
| 4. Connect an ohmmeter to contacts 1 and 2 gauges and measure resistance. It should be 450–550 Ohm. If the measured resistance does not correspond specified, replace the gauge. |
|
|